AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 12

Changing Settings from the Panel
You may change settings using the front panel buttons of the FM 4600 PLUS
series printer models. In addition you may also change settings via software
Utility and data stream commands.
Buttons
FEED+PAUSE
FEED+CANCEL
CANCEL
FEED+CANCEL
CANCEL
PAUSE
Setting Procedure:
To change settings using the buttons on the front panel:
1. Press PAUSE, verify mode on LCD display.
2. Press FEED and PAUSE at the same time to enter setup mode.
3. Press and hold FEED, use CANCEL to scroll through the list of features.
4. Press CANCEL to select desired feature.
5. Press and hold FEED, use CANCEL to scroll through the list of values for
the chosen feature.
6. Press CANCEL to save the currently displayed value.
7. Press PAUSE twice to exit setup mode and READY the printer.
Function
Press to enter setting mode.
(Don't press over 1 second)
Press to show next features.
Press to select desired feature.
To scroll through the list of values for the
chosen feature.
To save the currently displayed value.
To exit setup mode.
12