AMT Datasouth Fastmark 4600 PLUS Series User’s guide User Manual page 4

 This printer complies with the requirements in Part 15 of FCC rules for a
Class A computing device. Operation of this equipment in a residential area
may cause unacceptable interface to radio and TV reception, requiring the
operator to take whatever steps are necessary to correct the interference.
 Place the printer on a flat, firm and solid surface.
 Do not place the printer near a heat source or near water.
 Refer to the specification label on the bottom of this printer and ensure that
your power source exactly meets these requirements.
 Do not open the printer during operation to avoid electrical shock.
 Do not attempt to disassemble this printer if it malfunctions.
 All rights are reserved. No part of this document may be reproduced or
issued to third parties in any form without permission of AMT Datasouth.
 The material in this document is provided for general information and is
subject to change without notice.
Windows ® , MS-Word and MS-DOS are registered trademarks of Microsoft
Corporation
PC ® is a registered trademark of International Business Machines
Centronics ® is a registered trademark of Centronics Corporation
TM
PAL is registered trademark of AMT Datasouth Corporation
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
TRADEMARK CREDITS
4