Table of Contents
Advertisement
Preparation oh HDD ASS'Y
Fit to the corner.
0 – 1
0 – 1
1. Do not gouge when inserting and removing
the socket.
2. Do not drop HDD or add any impacts on it.
3. Insert CN into the end firmly.
4. Apply the load when attaching the parts.
20N to 30N (2 to 3Kgf)/cm2
PET Tape
HDD INS SHEET
Turn it to the board side (back side).
Safety Working
HEATER
S4
Attach it pushing the shaded
part not to push the fuse.
0~1
Hwater Fixed Tape
Center
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
S1:Insulation S2:Bitten S3:Sharp Edge
CAUTION
S4:Part No. Check S5:Other
Valley Fold Mountain Fold
1 – 1
9-37
Do not bend the bending
part of Heater
Connect the
Connector
Insert the
HDD FPC Ass'y
Advertisement
Table of Contents
