Panasonic Toughbook CF-30KTPAXxM Service Manual page 58

Arranging the Keyboard
Keyboard is installed
<Notes>
1.Apply the load when attaching the attaching parts. 20~30
Reusing the attaching parts is impossible
Assembly of LCD Cable Plate
S1:Insulation S2:Bitten S3:Sharp Edge
CAUTION
S4:Part No. Check S5:Other
(Notes)
1. Apply the load when attaching the attaching parts.
20~30N (2~3Kgf)/cm2
LCD CABLE COVE Set
LCD CABLE COVER CUSHION Attach.
Conductive Cloth Paste
1. Attach Keyboard , Keyboard Spacer Tape and Keyboard Back Plate.
(Insert the KB protrusions into the plate holes and determine the position.)
2. Attach Conductive Cloth to Keyboard Back Plate.
3. Attach Keyboard Spacer Sheet to Keyboard Back Plate.
(Ensure Keyboard Spacer Sheet does not run over the level of Keyboard Back Plate.)
Attach the
Keyboard
Plate hole
Spacer Tape
Attach the
Keyboard
Back Plate
Attach the
Keyboard
Spacer Sheet
DFHR3M83ZA
2~3Kgf /cm2
LCD CABLE COVER CUSHION
KB CABLE COVER CUSHION
CD Edge Sheet Attach.
KB CABLE COVE Set
KB CABLE COVER CUSHION Attach.
9-35
Conductive Cloth Paste
S3
To prevent from
touching the
KBD Cable
0~1mm
4~6mm