Panasonic Toughbook CF-30KTPAXxM Service Manual page 56

9.2.15. Setting the W-LAN Module, GPS PCB and Bluetooth PCB
1. Set W-LAN Module.
2. Fix the W-LAN Module using the 2 Screws <N11>
(No1 to No2).
3. Connect the Antenna Cables to the Connector on W-LAN
Module.
Antenna Cable(white)
<N11>
4. Fix the GPS BT Angle and GPS PCB using the 2 Screws
<N11> (No1 to No2).
5. Connect the Cable to the Connector on GPS PCB.
6. Fix the GPS Ass'y using the 4 Screws <N12>
(No1 to No12).
Preparations and assembly of W-LAN Module
512AN MMW
Torque of tightening screw :0.19 ± 0.02N·m( 2.0 ± 0.2kgf·cm)
Antenna Cable(black)
W -LAN
Module
<N11>
S4
Confirm the printing.
CAUTION
Insert within
8 mm or less
9-33
7. Connect the Cable to the Connector (CN25).
No.1
<N12>
No.3
<N12>
GPS PCB
No.1
<N11>
to Connector
(CN25)
Screws <N11>: DFHE5025XA
Screws <N12>: DXQT2+F3FNL
Note:
Tighten the Screws in the numbered order (No1 to No2).
Tighten the Screws in the numbered order (No1 to No2).
Tighten the Screws in the numbered order (No1 to No12).
How to discriminate the Wireless LAN card
For North America and Europe N5HZC0000042
S1:Insulation S2:Bitten S3:Sharp Edge
S4:Part No. Check S5:Other
W-LAN Module
Screw
No.2
GPS BT Angle
<N12>
No.4
<N12>
Bluetooth
PCB
No.2
<N11>
Connector(CN25)