Changing A Paper Size In The Optional Paper Tray Unit (Tray 2) - Ricoh Aficio MP 171F Troubleshooting Manual

Changing a Paper Size in the Optional Paper Tray Unit (Tray 2)

This section describes how to change the size of paper loaded in the optional pa-
per tray unit.
A
Make sure the paper tray is not in use.
B
Pull the paper tray out slowly until it stops.
C
Remove any remaining copy paper.
D
While pinching the release levers, slide the end fence outward.
1
To load 8 / "×14"L or 8
4
tray and place it in the corner pocket on the left.
E
While pressing the release lever, slide the side fence outward.
1
/ "×14"L size paper: pull the end fence out of the
2
Changing the Paper Size
6
73