Operations Are Not Possible When Messages Appear
This section describes likely causes of and possible solutions for messages that
appear when the machine fails to operate.
Message
Updating desti-
nation list. Re-
select
destination(s)
or sender's name
later.
Cause
The destination list is being up-
dated from the network using
SmartDeviceMonitor for Admin
or Web Image Monitor.
When You Cannot Send Scanned Files
Solution
Wait until the message disap-
pears. Do not switch off the pow-
er while this message is
displayed. Depending on the
number of destinations to be up-
dated, there may be some delay
before you can resume operation.
Operations are not possible while
this message is displayed.
5
55