Ricoh Aficio MP 171F Troubleshooting Manual page 63

Message
Exceeded max.
number of search
results which
can be dis-
played. Max.:
nnn
(A figure is placed at
n.)
You do not have
privileges to
use this func-
tion.
LDAP server
search timed
out. Check the
server status.
Specified group
contains some
invalid dest. Do
you want to se-
lect only valid
dest.?
Connection has
failed. Check
settings and
check Scanned
File Status.
Dest. authenti-
cation failed.
Check settings
and check
Scanned File
Status.
Sender's name is
not selected.
Specify send-
er's name.
Cause
Search results have exceeded the
max. displayable number.
Privileges to use this function.
A network error has occurred and
connection has failed.
The specified group contains
some destinations for sending by
e-mail and some destinations for
sending by Scan to Folder.
The correct network settings are
not made.
The entered user name or pass-
word was invalid.
The sender's name was not specified. A sender's name should be speci-
When a Message Is Displayed
Solution
Search again after changing the
search conditions.
Contact the administrator.
Try the operation once more. If
the message is still shown, the
network may be crowded. Check
the information of System Set-
tings. See "Administrator Tools",
General Settings Guide.
To select destinations for sending
by e-mail, press [Select] for the
message displayed on the e-mail
screen. To select destination for
sending by Scan to Folder, press
[Select] for the message displayed
on the Scan to Folder screen.
• Check the network settings of
the client computer.
• Check that components such
as the LAN cable are connect-
ed properly.
• Check that the server settings
are correct and the server is
working properly.
• Check that the user name and
password are correct.
• Check that the ID and pass-
word for the destination fold-
er are correct.
• A password of 128 or more char-
acters may not be recognized.
fied before sending e-mail. Send
e-mail after specifying the send-
er's name.
5
57