Konica Minolta bizhub C280 Product Manual page 60

bizhub C360/C280/C220 Copy Features & Functions
AUTO MAGNIFICATION — ADJUSTING COPIES TO THE PAPER SIZE
The most appropriate zoom ratio can be automatically selected based
on the size of the loaded document and the specifi ed paper size.
AUTO PAPER SELECT — AUTOMATICALLY SELECTING PAPER
The most appropriate paper size can be automatically selected based on
the size of the loaded document and the specifi ed zoom ratio. In this mode,
the device will detect the original placed on the original glass or loaded into
the ADF and then automatically select the same size paper if the magnifi cation
ratio is set to 100% or it will select the appropriate paper size based on the
zoom ratio specifi ed.
XY ZOOM - SPECIFYING SEPARATE HORIZONTAL & VERTICAL ZOOM RATIOS
By specifying separate horizontal and vertical zoom ratios, copies of the document
can be resized as desired.
DOUBLE-SIDED COPIES
Double-sided copies (duplex output) can be made from single- or double-sided
originals ranging from 5.5" x 8.5" to 12" x 18". You can also make double-sided
2-in-1, 4-in-1 and 8-in-1 copies.
SCANNING THE DOCUMENT IN SEPARATE BATCHES
A document with a large number of pages can be divided and scanned in separate
batches. Double-sided copies can be produced via the original glass or the document
pages can be alternately loaded onto the original glass or into the automatic
document feeder and then all pages can be printed together as a single job.
SEPARATE SCAN SETTINGS (Batch Print or Page Print)
Enables users to select whether they want their separate scan jobs to print after
each page has been scanned (Batch Print) or to wait until the entire separate scan
job (Page Print) is completed to print out the scanned job. Separate scan is used
when the number of originals exceeds the capacity of the document feeder
or if you want to combine ADF originals with documents scanned off the glass.
56