Konica Minolta bizhub C280 Product Manual page 33

As depicted in the illustrations shown, there is ONE standard USB port – located
in the front on the bizhub C360/C280/C220 devices. The remaining standard USB
Ports are located in the back of the device, one of which in not available to the
end-user for USB function.
5
2 3 4
The fi rst USB Port located at
the far left is used for internal
wiring. It is not available for
end-user access.
bizhub C360/C280/C220
Rear Side USB Ports
Front
of MFP
The third USB Port, located
at the far right, is available
to Authorized Konica
Minolta Service Technicians
for fi rmware upgrades.
The second USB Port
(located in the middle)
is available to connect
an optional Authentication
Device (Biometric Unit
or HID Card).
(Use for specified purpose ONLY)
USB Port for Internal Wiring
For Authentication Unit Only
For Firmware Downloads Only (with cap)
NOTE: Do not swap ports.
Only port for
Back
Authentication
of MFP
Unit left open.
29
Design