Bizhub C360/C280/C220 System Confi Guration; Standard Features/Functions - Konica Minolta bizhub C280 Product Manual

bizhub C360/C280/C220
30
System Confi guration

Standard Features/Functions

The bizhub C360/C280/C220 product series function as printers, copiers and
network scanners in their standard confi guration. Fax is available as an option.
The base unit includes a PCL6 and PostScript Level 3 print controller, 2 GB
memory, duplex unit, 250 GB Hard Disk Drive and B/W drum, color drums
and CMYK developer units.
The devices are equipped with two universal 500-sheet paper drawers
and a 150-sheet bypass tray.
TRAY 1 (UNIVERSAL TRAY) SUPPORTS THE FOLLOWING PAPER SIZES:
• 11" x 17" to 8.5" x 11", 5.5" x 8.5", 8" x 13"
When Tray 1 is equipped with Plain Paper (15.94 lb. to 23.94 lb.),
the maximum capacity is 500 sheets. When Thick Paper 1 (24.25 lb.
to 39.88 lb.), Thick Paper 2 (40.19 lb. to 55.63 lb.), Thick Paper 3
(55.88 lb. to 68.13 lb.) or Thick Paper 4 (68.38 lb. to 72.06 lb.)
is housed in Tray 1, the maximum tray capacity is 150 sheets.
TRAY 2 (UNIVERSAL TRAY) SUPPORTS THE FOLLOWING PAPER SIZES:
• 12.25" x 18" to 8.5" x 11", 5.5" x 8.5", 8" x 13"
When Tray 2 is equipped with Plain Paper (15.94 lb. to 23.94 lb.),
the maximum capacity is 500 sheets. When Thick Paper 1 (24.25
lb. to 39.88 lb.), Thick Paper 2 (40.19 lb. to 55.63 lb.), Thick Paper 3
(55.88 lb. to 68.13 lb.) or Thick Paper 4 (68.38 lb. to 72.06 lb.)
is housed in Tray 2, the maximum tray capacity is 150 sheets.
THE BYPASS TRAY CAN HANDLE THE FOLLOWING PAPER SIZES:
• 12" x 18" to 5.5" x 8.5", 4" x 6", 8" x 13"
• Banner Paper (11.75" x 47.25")
When the bypass tray is equipped with Plain Paper (15.94 lb. to 23.94 lb.),
the maximum capacity is 150 sheets. When Thick Paper 1, Thick Paper 2,
Thick Paper 3, Thick Paper 4, OHP Transparencies, Postcards or Label
Sheets are loaded, the bypass tray has a maximum capacity of 20 sheets.
Up to 10 envelopes and up to 10 banner sheets can be loaded into the
manual bypass tray. OHP Transparencies, Postcards, Envelopes, Label
Sheets and banner paper can only be fed through the bypass tray.
*This setting must be changed by an authorized Konica Minolta Service Technician.