Konica Minolta bizhub C280 Product Manual page 111

bizhub C360/C280/C220
RESOLUTION
This is used to set the resolution at which the originals are to be scanned.
There are four resolution settings available. Fine is the system default.
Standard (200 x 100) Press this setting when scanning a normal original and you need to transmit
in the fastest time possible.
Fine (200 x 200 dpi) Press this setting when scanning a normal original or one that may have slighter
smaller text than normal.
300 x 300 dpi Press this setting when scanning a normal original and you want to transmit
it at a higher resolution.
Super Fine (400 x 400 dpi) Press this setting when scanning originals containing small graphics or text.
Ultra Fine (600 x 600 dpi) Press this setting when scanning originals containing very small graphics or text.
As you increase the resolution of the document, you increase the amount
of data that is sent as well as the communication time.
If Ultra-Fine (600 x 600 dpi) Resolution is selected and the receiving machine
does not support this resolution level, the sending machine will drop down
to a resolution that is compatible with the receiving machine.
FILE TYPE
This setting is used to set the fi le type of the scanned original when it is delivered
to the selected destination. However, File Type cannot be set in Fax Mode. A fax
is sent as a TIFF fi le. It cannot be sent as a PDF, Compact PDF, XPS, or Compact
XPS fi le. This is not a limitation of the C360/C280/C220. The ITU protocol (industry
standard) for fax transmissions is the TIFF fi le format.
DENSITY
This setting enables you to set the density according to the content
of the original. The factory default setting for Density is Normal.
Light Select for light density scanning.
Standard Select for normal density scanning.
Dark Select for heavy density scanning.
Fax Features & Functions
107