Fax Settings - Pbx Connection Setting - Konica Minolta bizhub 552 User Manual

10.4 Administrator Settings (G3)
Item
[Action when TSI User Box is not set.]
[Print]
[TSI User Box Registration]
Reference
- You can also specify the registered group as the destination.
- You can specify Group, which contains only e-mail address, to distribute received faxes in TSI User Box
Settings.
- Even though [Print] is set to [Yes], faxes distributed to User Box are not printed.

10.4.11 Fax Settings - PBX Connection Setting

Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.
Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.
bizhub 652/552
Description
Configure how the machine should react when a specified
User Box is not found.
[Automatically Print]: Prints received documents.
[Memory RX User Box]: Saves received documents in a Mem-
ory RX User Box.
[Specified User Box]: Saves received documents in a User Box
of this machine. Click [Specified User Box], and use the key-
pad to enter a User Box number.
Specify whether to print a received document after receiving.
Register destinations to which to distribute RX documents.
Up to 128 destinations can be registered. Select a desired
number, and then press [Edit].
[TSI User Box Allows you to distribute received faxes to other fax machines
Settings] or User Boxes in this machine. Specify a sender's fax number
in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].
• A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.
10
10-26