Fax Settings - Pbx Connection Setting - Konica Minolta bizhub 223 User Manual

10.4 Administrator Settings (G3)
Item
Reference
- You can also specify the registered group as the destination.

10.4.11 Fax Settings - PBX Connection Setting

Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.
Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.
bizhub 423/363/283/223
Description
[TSI User Box Allows you to distribute received faxes to other fax machines
Settings] or User Boxes in this machine. If no Hard Disk is installed in
this machine, the faxes cannot be distributed to User Boxes in
this machine.
Specify a sender's fax number in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].
• A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.
10
10-28