4.1
To begin operation
4
Registering the basic information
This section explains the necessary settings and registrations before using the fax and scan functions of this
machine.
4.1
To begin operation
The following registrations are required in order to use this machine.
4.1.1
Environment and device requirements
The following environment and devices must be prepared to use various functions of this machine.
Functions
Network scan function
G3 fax function
Network fax function
4.1.2
Connection and settings of network cable
To use the function of this machine that sends image data over the network, such as the Network Scan and
Network Fax functions, connection and settings of the network cable are required.
Connection of network cable
Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.
bizhub 652/552
Environment and device
•
•
•
•
Internet Fax
•
•
IP Address Fax
•
•
•
Connection of network cable
Network settings
Installation of the optional Fax Kit FK-502
Connection of modular cable
Connection of network cable
Network settings
Installation of the optional Fax Kit FK-502
Connection of network cable
Network settings
4
4-2