Konica Minolta bizhub 552 User Manual page 301

13.5 Fax Glossary
Term
Transmission reservation
Transmission source
record
Transmission time
TSI
V34
Z-Folded Original
bizhub 652/552
Description
A function of programming the next transmission during transmission or
printing.
The transmission time, name, telephone number, page number, and other in-
formation on the sender's side printed at the edge of the document on the
receiver's side.
The time needed to send a fax. The higher the resolution or larger the paper,
the longer the transmission takes.
The acronym for Transmitting Subscriber Identification, which is the ID of a
fax transmission terminal.
A communication mode used for super G3 fax transmission. Super G3 mode
transmission may not be activated because of a telephone line status where
the receiver's or sender's machine is connected to a telephone line via a pri-
vate branch exchange switchboard. If this occurs, the G3 mode should be
disabled by turning V34 off.
This function first determines the document size that cannot be detected cor-
rectly because of folds, then scans and sends the document after the verifi-
cation. This function is available only when a document is scanned by ADF.
13
13-14