Address Book - Ip Address Fax - Konica Minolta bizhub 552 User Manual

9.2 One-Touch/User Box Registration
Item
[Icon]
Reference
- To check a registered destination, select its registered name, and then press [Check Job Set.].
- To change the settings for a registered destination, select its registered name, and then press [Edit].
- To delete a registered destination, select its registered name, and then press [Delete].
9.2.8

Address Book - IP Address Fax

Register IP address fax destinations. To register a new destination, press [New].
1/2 page
2/2 page
Item
[No.]
[Name]
[Destination]
bizhub 652/552
Description
Select an icon.
• The selected icon is used for the image panel function that is available
when the optional function code "CAA" is enabled.
Description
Press [No.], and then enter the registration number of the destination be-
tween 1 and 2,000. Press [OK] without entering any number to register the
smallest number available.
Use the touch panel to enter the name to be registered in the address book
using up to 24 characters.
Enter the host name, IPv4 address, IPv6 address or E-mail address as the
host address for the destination device.
The host name or E-mail address must be less than 317 characters in length.
• If you enter a host name and then select to enter an IP address, the host
name is cleared.
• Before entering the host name or E-mail address, check that the DNS set-
tings are correctly specified. For details, refer to the [User's Guide Net-
work Administrator].
9
9-16