Command Line Utilities - Xerox 6100BD - Phaser Color Laser Printer System Manual

Command Line Utilities

Utility
/opt/XRXnps/bin/setascii decomposer
/opt/XRXnps/bin/setfifomode
/opt/XRXnps/bin/setFontSize
/opt/XRXnps/bin/setimagepath
/opt/XRXnps/bin/setlcdsDJDEsemicolon
/opt/XRXnps/bin/setlcddsDJDEspimm
/opt/XRXnps/bin/setlcdsPmodeSwop
/opt/XRXnps/bin/setlpcopycount
/opt/XRXnps/bin/setpapdbootswitch
/opt/XRXnps/bin/setsetlineterm
/opt/XRXnps/bin/setsetpclcontrol
(Option1)
/opt/XRXnps/bin/setpclcontrol (Option2)
/opt/XRXnps/bin/setpclcontrol (Option3)
System Guide
Change Description
Forced ASCII files through designated
decomposer (that is, ASCII through
PCL). Implemented in queue
manager in 2.1
Enables FIFO job reception mode in
front end of system.
In 3.1, allows user to set the font size
on the main GUI to a larger and more
visible size.
Disables/Enables Xerox Image Path.
any problems that necessitate using
this utility should be reported to Xerox
development ASAP.
Allows for correct printing of a DJDE
that has the incorrect termination
of;END; instead of,END, (J11patch
compatibility).
Enables the system to ignore 0x)b in
between DJHDE begin records (J11
patch compatibility).
Disables/enables swopping of BEGIN
values when there was a page
orientation switch (J11 patch
compatibility.
Default is to ignore an LPR Copy
Count of 1. Utility to set lpr to accept a
copy count of 1.
Sets Appletalk behavior for
AdboePS8.6 foreground job problem
if font list is large.
Sets the default PCL decomposer line
termination mode (that is, CR.LF).
Use "setpclcontrol" tool in 3.1.
PCL custom size factory default script
allows the Xerox FreeFlow Print
Server to better match HP's variations
on customer size imaging.
PCL saves resources function. Gives
capability to save pcl resource from
memory to disk on a job by job basis.
Hints and Tips
Focus
Black and
white
Both
Both
Color
Both
LCDS
LCDS
LCDS
Both
Black and
white
Black and
white
Black and
white
9- 9