Pitch Configuration Chart
Ghost Configuration Chart
4 Colors Configuration Chart
MQ Chart
Alignment Chart
PHD Refresh Configuration Chart Prints the chart to confirm the light fatigue of the PHD (Print Head Device) unit in A4 or Letter.
Machine Check
Purpose:
To check the mechanical operations of the printer.
Values:
Machine Check Main Motor Operation Check*
Fuser Motor Operation Check
Feed Roll Operation Check*
REGI CLUTCH Operation Check
Dispense Motor Check(Yellow)
Dispense Motor Check(Magenta)
Dispense Motor Check(Cyan)
Dispense Motor Check(Black)
Play of Sound
1
*
When performing the feed roll operation check, remove the paper tray from the printer.
Paper Wrinkle Check Mode
Purpose:
To determine whether or not paper is wrinkled in the fuser.
This function stops printing before the paper enters the fuser. After you remove the paper inside the printer, check the following:
If the paper is wrinkled, the wrinkle occurred in the part other than fuser.
l
If the paper is not wrinkled, the wrinkle occurred in the fuser.
l
Values:
Paper
Letter*
Specifies the size of paper.
Size
Legal
Envelope
#10
8.5 x 13"
Executive
Prints the chart to confirm the pitch in A4 or Letter.
Prints the chart to confirm the ghost in A4 or Letter.
Prints the chart to confirm the gray scale for four color printing in A4 or Letter.
Prints the chart to confirm the binding in A4 or Letter.
Prints the chart to confirm the alignment in A4 or Letter.
Checks the operation of the main motor.
Checks the operation of the fuser motor.
1
Checks the operation of the separatro roller.
Checks the operation of REGI CLUTCH.
Checks the operation of the dispense motor for each toner cartridge.
Plays the sound the selected motor makes when it runs normally.