Dell 1320c - Color Laser Printer User Manual page 33

RARP
Manually
Set
IP Address
Subnet Mask
Gateway Address
DNS DNS Mode
DNS Server Address
DNS Domain Name
LPD Connection Time-Out
IP Filter
Port9100 Port Number
Connection Time-Out
IP Filter
HTTP Port Number
Simultaneous
Connections
Connection Time-Out
FTP Password
Connection Time-Out
E-Mail Alert
Purpose:
To configure detailed settings for E-Mail Alert. This page can also be displayed by clicking E-Mail Alert in the Left Frame.
Values:
E-Mail Server Primary SMTP Gateway
Settings
SMTP Port Number
E-Mail Send Authentication
SMTP Login User
SMTP Login Password
POP3 Server Address*1
POP3 Port Number*1
POP User Name*1
POP User Password*1
Reply Address
SMTP Server Connection
E-Mail Alert E-Mail List 1
Settings
Select Alerts
for List 1
Uses RARP (Reverse Address Resolution Protocol) to set the IP address.
Uses the control panel or the Dell Printer Configuration Web Tool to set the IP address manually.
Sets the IP address allocated to the printer in the nnn.nnn.nnn.nnn format, where nnn is a variable between 0
and 255. Note that values 127 and 224-254 are not valid for the first three-digits.
Sets the subnet mask in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0 and
255. Note that 255.255.255.255 is invalid.
Sets the gateway address in the nnn.nnn.nnn.nnn format. Each section of nnn.nnn.nnn.nnn is a value between 0
and 254. Note that values 127 and 224-254 are not valid for the first three-digits.
Select the check box to get the DNS server address automatically from the DHCP server.
Sets the DNS server address.
Specifies the domain name of the domain name server. Up to 255 alphanumeric characters, periods, and hyphens
can be used. If specifying more than one domain name, separate them using a comma or semicolon.
Sets the connection timeout period from 1 to 1000 seconds.
To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
Sets the port number from 9000 to 9999.
Sets the connection timeout period between 1 and 1000 seconds.
To set the IP Filter settings, click IP Filter. The IP Filter page is displayed.
Sets the port number to 80 or from 8000 to 9999.
Displays the maximum number of connections received simultaneously by the client.
Sets the connection timeout period from 1 to 255 seconds.
Sets whether to enable or disable the password. And also specifies the password value up to 7 characters.
Sets the connection timeout period from 1 to 1000 seconds.
Sets the primary SMTP gateway.
Specifies the SMTP port number. This must be 25 or between 5000 and 65535.
Specifies the authentication method for outgoing e-mail.
Specifies the SMTP login user. Up to 63 alphanumeric characters, periods, hyphens, under bars, and at
symbols (@) can be used. If specifying more than one address, separate them using commas.
Specifies the SMTP account password up to 31 alphanumeric characters.
Specifies the POP3 server address in IP address format of "aaa.bbb.ccc.ddd" or as a DNS host name up
to 63 characters.
Specifies the POP3 server port number. This must be 110 or between 5000 and 65535.
Specifies the POP3 account user name.
Up to 63 alphanumeric characters, periods, hyphens, under bars, and at symbols (@) can be used. If
specifying more than one address, separate them using commas.
Specifies the POP3 account password up to 31 alphanumeric characters.
Designates the reply e-mail address sent with each E-mail Alert.
Displays the status of the SMTP server connection.
Sets acceptable e-mail addresses for the E-Mail Alert feature up to 255 alphanumeric characters.
Supplies Alerts Select the check box to receive an E-Mail Alert for consumables.
Paper Select the check box to receive an E-Mail Alert for paper handling.
Handling
Alerts