Dell 1320c - Color Laser Printer User Manual page 69

Non-Dell Toner Off*
On
Apply New Settings
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.
Initialize PrintMeter
Purpose:
To initialize the data for the print meter. After executing this function to automatically restart the printer, the value of the meter resets to 0.
Values:
Initialize PrintMeter Click Start to initialize the print meter.
Web Link Customization
Purpose:
To configure the link used for ordering supplies.
Values:
Select Reorder URL
Regular*
Premier
Apply New Settings
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.
TCP/IP Settings
Purpose:
To specify the TCP/IP settings for the network.
Values:
IP Address Mode AutoIP*
DHCP
BOOTP
RARP
Manually Set
IP Address
Subnet Mask
Gateway Address
Disables the use of refilled toner cartridges.
Enables the use of refilled toner cartridges.
After you complete the settings, press the Apply New Settings button to apply the changes.
Specifies the URL that Order Supplies at links to in the left frame of the Dell Printer Configuration Web Tool.
accessories.us.dell.com/sna
premier.dell.com
After you complete the settings, press the Apply New Settings button to apply the changes.
Automatically sets the IP address.
Uses DHCP to set the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Manually sets the IP address.
Sets the IP address allocated to the printer.
Sets the subnet mask.
Sets the gateway address.