Adjust Altitude; Reset Defaults - Dell 1320c - Color Laser Printer User Manual

Color Registration Adjustment 2 (Process) Yellow
Apply New Settings
Restart printer to apply new settings

Adjust Altitude

Purpose:
To adjust the height of the location to install the printer.
Values:
0 meter*
1000 meters
2000 meters
3000 meters
Apply New Settings
Restart printer to apply new settings Press the Restart printer to apply the new settings button to apply the changes.

Reset Defaults

Purpose:
To initialize the non-volatile memory (NVM). After executing this function to automatically restart the printer, all the menu parameters are reset to their default
values.
Values:
Reset Defaults and restart printer. Click Start to initialize the non-volatile memory (NVM) memory.
Non-Dell Toner
When Non-Dell toner is used, the printer may be severely damaged and may not be covered by your warranty.
Purpose:
To specify whether to use the refilled toner cartridge or not. When this setting is on, you can use toner cartridges provided by other companies.
Values:
0*
-9-9 Specifies the values for the process direction that are found in the color registration chart.
0*
Magenta -9-9
0*
Cyan -9-9
0*
After you complete the settings, press the Apply New Settings button to apply the changes.
Press the Restart printer to apply the new settings button to apply the changes.
Selects the value close to the height of the location to install the printer.
After you complete the settings, press the Apply New Settings button to apply the changes.