To print the settings and history information of your printer.
The reports are printed in the paper size specified in printer settings. The
default is A4 or Letter.
Values:
Printer Settings
Device Settings
Job History
Error History
Color Test Page
Printer Maintenance
The Printer Maintenance tab contains the System Settings, Paper Density,
Adjust BTR, Adjust Fuser, Color Registration Adjustment, Adjust Altitude,
Reset Defaults, Non-Dell Toner, and BTR Refresh Mode pages.
NOTE:
Values marked by an asterisk (*) are the factory default menu settings.
System Settings
Purpose:
To configure the power saving mode, time-out time, job log auto print, mm/
inch setting, default paper size setting, and low toner alert message setting.
Values:
*1
Sleep
Deep Sleep
90
Understanding the Tool Box Menus
Click to print a detailed list of the printer settings.
Click to print a detailed list of the device settings.
Click to print the completed jobs history.
Click to print the error history.
Click to print a color test page.
*
5 minutes
5–30 minutes
*
6 minutes
1–6 minutes
Specifies the time taken by the
printer before it enters Sleep
mode after it finishes a job.
Specifies the time taken by the
printer before it enters Deep
Sleep mode after it goes into
Sleep mode.