Cisco 6509 - Catalyst Chassis Switch Installation Manual page 76

Catalyst 6513 Switch
Table 1-19 Catalyst 6513 Switch Features (continued)
Feature
Power Supply
Catalyst 6500 Series Switches Installation Guide
1-52
Description
Supports one or two power supplies. The following models are
•
supported:
WS-CAC-2500W (2500 W AC-input power supply).
–
WS-CDC-2500W (2500 W DC-input power supply).
–
WS-CAC-3000W (3000 W AC-input power supply).
–
– WS-CAC-4000W-US (4000 W AC-input power supply).
WS-CAC-4000W-INT (4000 W AC-input power supply).
–
PWR-4000-DC (4000 W DC-input power supply).
–
WS-CAC-6000W (6000 W AC-input power supply).
–
Installed power supplies can be of different ratings. Installed power
•
supplies can also be both AC-input, both DC-input, or one AC-input and
one DC-input. Power supplies can be configured in either redundant or
non-redundant mode.
All Catalyst 6500 series AC-input power supplies require single-phase
•
source AC. Source AC can be out of phase between multiple power
supplies or multiple AC-power plugs on the same power supply because
all AC power supply inputs are isolated.
You must install a 2500 W or higher capacity power supply when using
•
the Supervisor Engine 32 or the Supervisor Engine 720 and the
high-speed fan tray.
Chapter 1 Product Overview
OL-5781-04