Cisco 6509 - Catalyst Chassis Switch Installation Manual page 64

Catalyst 6509-NEB Switch
Table 1-15 Catalyst 6509-NEB Switch Features (continued)
Feature
Fan Tray
Catalyst 6500 Series Switches Installation Guide
1-40
Features
Supports one hot-swappable fan tray. These fan tray models are
•
supported:
WS-C6509-NEB-FAN (Standard fan tray—294 CFM). Supports
–
Supervisor Engine 1 and Supervisor Engine 2 only; does not
support Supervisor Engine 32 or Supervisor Engine 720.
WS-6509-NEB-UPGRD
–
upgrade kit). This kit must be installed if you are installing a
Supervisor Engine 32 or a Supervisor Engine 720 in the
Catalyst 6509-NEB switch. The kit contains a high-speed fan tray,
back panel, and power harness. If you are operating the chassis from
an AC source, you will also need to order a 3000 W AC-input power
supply which has a front panel DC power connector. The upgrade
kit fan tray receives 42 VDC power from this front panel DC power
connector through a power harness also provided in the upgrade kit.
If you are operating the chassis from a DC source, you can power
the system with either the 2500 W or 4000 W DC-input power
supplies and power the upgrade fan tray from the site source DC.
Note Both fan tray models contain nine individual fans. The
individual fans are not field replaceable. You must replace the
fan tray.
Fan tray STATUS LED
•
– Red—One or more individual fans have failed.
– Green—Fan tray is operating normally.
1
—630 CFM (The fan tray is a part of the
Chapter 1 Product Overview
OL-5781-04