Wdm Transceiver Modules - Cisco 6509 - Catalyst Chassis Switch Installation Manual

Transceivers
Figure B-6
2
1
3

WDM Transceiver Modules

The WDM transceiver modules are listed in
modules and reference illustrations.
Table B-7 WDM Transceiver Modules Descriptions
Transceiver
Type Product Number
CWDM GBIC Refer to
Transceivers specific product numbers
Catalyst 6500 Series Switches Installation Guide
B-10
10-Gigabit XENPACK Transceiver Module
3 4
T X
R X
Captive installation screw
Transmit optical bore
Description
Table B-8 for The CWDM GBIC transceivers use MMF and SMF cable to
•
provide 1000BASE-X full-duplex connectivity between the
GBIC-compatible modules, supervisor engines, and the
network.
A set of eight CWDM GBICs, listed in
•
for use with the CWDM Passive Optical System.
Figure B-7
•
Refer to your release notes for a list of modules and the
•
software release level necessary to support these CWDM
GBICs.
Appendix B Transceivers, Module Connectors, and Cable Specifications
1
2 Dust plug
4 Receive optical bore
Table B-7 along with brief descriptions of the transceiver
shows the physical appearance of a CWDM GBIC.
Table B-8, are available
OL-5781-04