Cisco 6509 - Catalyst Chassis Switch Installation Manual page 284

Transceivers
Table B-7 WDM Transceiver Modules Descriptions (continued)
Transceiver
Type Product Number
DWDM Refer to
XENPAK specific product numbers
Transceivers
R/O WDM WDM-XENPAK-REC
XENPAK
Transceiver
Table B-8
Model Number
CWDM-GBIC-1470=
CWDM-GBIC-1490=
CWDM-GBIC-1510=
CWDM-GBIC-1530=
CWDM-GBIC-1550=
CWDM-GBIC-1570=
CWDM-GBIC-1590=
CWDM-GBIC-1610=
Catalyst 6500 Series Switches Installation Guide
B-12
Description
Table B-11 for DWDM XENPAK transceivers are used as part of a DWDM
•
optical network to provide high-capacity bandwidth across an
optical fiber network.
There are 32 fixed-wavelength XENPAK transceivers that
•
support the International Telecommunications Union (ITU)
100 GHz wavelength grid. (See
wavelengths.)
• Refer to your release notes for a list of compatible modules and
the software release level necessary to support these DWDM
XENPAK transceivers.
Figure B-10
•
XENPAK transceiver.
• The R/O WDM XENPAK receiver (WDM-XENPAK-REC)
operates as a pluggable receiver on any unidirectional link in a
CWDM or DWDM transport network; there is no transmitter in
the XENPAK.
The receiver can be used for all wavelengths supported by Cisco
•
DWDM XENPAK transceivers.
The W/O WDM receiver has a single SC connector.
•
Refer to your release notes for a list of compatible modules and
•
the software release level necessary to support these R/O WDM
XENPAK receivers.
CWDM GBIC Transceivers
Color Code
Gray
Violet
Blue
Green
Yellow
Orange
Red
Brown
Appendix B Transceivers, Module Connectors, and Cable Specifications
Table B-11
shows the physical appearance of the DWDM
CWDM GBIC Wavelength
1470 nm laser single-mode
1490 nm laser single-mode
1510 nm laser single-mode
1530 nm laser single-mode
1550 nm laser single-mode
1570 nm laser single-mode
1590 nm laser single-mode
1610 nm laser single-mode
for a list of the
OL-5781-04