HP L1000 - 9000 - 0 MB RAM Installation Manual page 81

Installation guide, third edition - hp rp5400 family of servers

Hide thumbs Also See for L1000 - 9000 - 0 MB RAM:

Table of Contents

Step 4. When the initial power-up boot process completes in approximately one to five minutes, the BCH

main menu will be displayed:

Step 5. To start the boot process using the primary boot path, enter BO PRI, at Boot Console Handler BCH

main menu prompt and press

NOTE

Step 6. Once the system reaches the UNIX login prompt the following will be displayed on the console

screen:.

Chapter 3

ENTER

Booting a system to a UNIX login prompt from BCH main menu can take 20 minutes

or longer depending on your software and hardware configuration.

Cabling and Power-Up

rp54xx Server Boot Process

Table of Contents

Rp5400