HP L1000 - 9000 - 0 MB RAM Installation Manual page 26

Installation guide, third edition - hp rp5400 family of servers

Hide thumbs Also See for L1000 - 9000 - 0 MB RAM:

Table of Contents

Installing Additional Components

Installing Graphics

Step 4. Using a torx 15 screwdriver, loosen the captive screws on the right side panel. This panel has a

label which shows which PCI I/O slots are available and the corresponding paths. The label shown

below is for an rp5400.

Step 5. Grasp the handle on the right rear panel and remove the panel from the side of the chassis. The 12

PCI slots, numbered 1-12 from bottom to top, will be in view.

Chapter 1

Table of Contents

Rp5400