HP L1000 - 9000 - 0 MB RAM Installation Manual page 42

Server Unpacking and Installation
Install Deskside Server
Step 7. Locate the two pull-tabs. One pull-tab is longer than the other. The shorter pull-tab is blank on both
sides. The back of the shorter pull-tab provides a writable surface for twin use.
Step 8. Locate the plastic bag containing the label sheet (taped to the server).
Step 9. Remove the label containing serial number, base product, processor product, and model information
from the label sheet and apply to the back of the longer pull-tab.
NOTE
Step 10. Insert the pull-tabs into the front bezel. Install the longer pull-tab in the left side plastic window in
such a way that the rp54xx logo is visible. Install the shorter pull-tab in the right side plastic
window with either surface visible. Refer to the diagram above for pull-tab locations.
42
Pull-tab and label shown above is for an rp74xx Server. rp54xx uses the same style
label and similar pull-tab.
Chapter 2