HP L1000 - 9000 - 0 MB RAM Installation Manual page 73

Step 7. Connect the 9-pin end of the RS-232 cable (Supplied) to the connector labeled CONSOLE on the
A5591-63002 "W-type" adapter cable.
CAUTION
Step 8. Connect one end of a LAN cable to RJ-45 connector labeled 10-Base-T on the Secure Web Console.
Step 9. Connect the other end of the same LAN cable to your site LAN.
Step 10. Configure the Secure Web Console in accordance with the documentation that was provided with it
or refer to http://www.docs.hp.com
Step 11. Once the Web Console has been properly configured, the remaining end of the serial cable between
the server and the Web Console may be connected.
Chapter 3
To prevent unauthorized access to your rp54xx system, do not connect the other end
of the serial cable to the Secure Web Console until both the server and the Web
Console have both been fully configured.
Cabling and Power-Up
Secure Web Console Installation
73