HP L1000 - 9000 - 0 MB RAM Installation Manual page 62

Cabling and Power-Up
Configure System Consoles
Local Console Serial Port bit rate: 9600 bits/s
Local Console Serial Port Flow Control: Software
Local Console Serial Port Terminal Type: vt100
Remote Console Serial Port Modem Protocol: CCITT
bit rate: 19200 bits/s
Remote Console Serial Port Modem Flow Control: Software
Remote Console Serial Port Modem Transmit Configuration Strings: Enabled
Remote Console Serial Port Modem Presence: always connected
Do you want to modify the Local Console Serial Port settings? (Y/N)
Do you want to modify the Remote Console Serial Port Modem settings? (Y/N)
GSP Host Name: fesrhapgsp
If necessary, use the GSP help facility by typing GSP>he. Once in the help facility, type the command need
help with. Use LI for a list of commands.
The following baud rates are recommended for the revision A GSP:
• Console: 19200
• Remote: 19200
• UPS: 1200
The following baud rates are recommended for the revision B GSP:
• Console: 38400
• Remote: 38400
• UPS: 1200
62
Remote Console Serial Port Modem
Chapter 3