HP L1000 - 9000 - 0 MB RAM Installation Manual page 27

Step 6. Remove the PCI slot cover from the slot that will receive the PCI card. To remove the PCI slot cover,
slide the PCI slot cover away from the server.
Step 7. Center the graphics card within the space created by removing the PCI I/O slot cover. Slide the card
toward the edge connectors. Ensure the edge connectors on the card are in alignment with the
connectors of the slot. Apply pressure to the card until it snaps firmly in place. Repeat process for
USB card.
Chapter 1
Installing Additional Components
Installing Graphics
27