HP L1000 - 9000 - 0 MB RAM User Manual page 64

Cable Connections
Core I/O Connections
1. 10/100-Base-T LAN (RJ-45) Connector.
GSP LAN.
2. Green/Red (Upper LED).
Green = GSP Power On.
Red = Guardian Support Processor Test Failed.
3. Green/Yellow, (Lower LED).
Green = 100 Base-T Link OK.
Flashing Green = 100 Base-T LAN Activity.
Yellow = 10 Base-T Link OK.
Flashing Yellow = 10 Base -T LAN Activity.
4. Console/UPS/Remote Connector (D-Type 25-Pin female).
Requires an A6144-63001 "M" adapter cable.
5. 10/100 Base-T = Primary LAN (RJ-45) Connection.
Path 0/0/0/0.
6. Green/Yellow (Upper LED).
Green = 100 Base-T Mode.
Green Blinking = 100 Base-T Receiving.
Amber = 10 Base-T Mode.
Amber Blinking = 10 Base-T Receiving.
7. Green (Lower LED).
Green = Link OK (10/100 Base-T Mode indicated by LED #6).
Green Blinking = Transmitting.
8. Ultra-2 SCSI Connector (68-Pin VHDCI SCSI).
Path 0/0/1/0.
9. SCSI Mode (Green, Upper LED)
On = Low Voltage Differential (LVD) Mode.
Off = Single Ended Mode.
10. SCSI Terminator Power (Amber, Lower LED)
On = Terminator power present
Off = Terminator power Not present.
50
Chapter 4