HP L1000 - 9000 - 0 MB RAM User Manual page 111

HP Guardian Service Processor Command Interface
Type HE to get the list of available commands
fesrhapgsp:
ALERT LEVEL: 6=Boot possible, pending failure or environmental problem - action required
SOURCE: 6=platform - SOURCE DETAIL: 3=cabinet fan
PROBLEM DETAIL: 4=fan failure
GSP> sl
SL
Which buffer are you interested in :
Incoming, Activity, Error, Current boot or Last boot ? (I/A/E/C/L) e
e
Do you want to set up filter options on this buffer ? (Y/[N]) n
n
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q CR to escape.
Log Entry # 0 :
ALERT LEVEL: 6=Boot possible, pending failure or environmental problem - action required
REPORTING ENTITY TYPE: 2=power monitor - REPORTING ENTITY ID: 00
CALLER ACTIVITY: 4=monitor - CALLER SUBACTIVITY: 05=fan
SOURCE: 6=platform - SOURCE DETAIL: 3=cabinet fan - SOURCE ID: 04
PROBLEM DETAIL: 4=fan failure - ACTIVITY STATUS: F
Data 0 : Low=00000000 : High=00000000 - type
Data 1 : Low=0F151D08 : High=00006303 - type 11 = Timestamp 04/15/1999 21:29:08
q
fesrhapgsp:
ALERT LEVEL: 6=Boot possible, pending failure or environmental problem - action required
SOURCE: 6=platform - SOURCE DETAIL: 3=cabinet fan
PROBLEM DETAIL: 4=fan failure
GSP> co
CO
You are now leaving the Guardian Service Processor Command Interface
and returning to the console mode.
Main Menu: Enter command or menu >
Key FRU Identification Fields for Error Chassis Logs
The following fields are for FRU identification.
Alert Level:
Source:
Source Detail:
Source ID:
Problem Detail:
Timestamp:
The above sample system alert message shows the following:
1. The problem does not affect booting of the system.
Chapter 6
0 = Data Field Unused
Type Ctrl B to reactivate it.
How the problem has affected the system operation.
What major part of the system the alert is referring to (i.e., platform,
memory, processor, etc.).
What sub-part of the system the alert is referring to (i.e., cabinet fan,
DIMM, high voltage DC power, etc.).
Specific FRU referred to in Source and Source Detail (i.e., fan #4).
Specific problem information (i.e, power off, functional failure, etc.).
When the problem occurred.
Troubleshooting
Chassis Code to FRU Decode
97