Server Unpacking and Installation
Receive and Unpack A Non-Integrated Server
NOTE
Step 2. If you are moving the server manually, use three people to lift the server from the packing material
and pallet. Carefully move the server to the selected location.
Step 3. If you are moving the server by an approved lifting device (such as Genie Lift
flap from the front lip of the carton bottom to allow access to the server, as illustrated below.
Removal of the tear flap will reveal a slot between the bottom of the server and the inside bottom of
the cardboard box.
8
The packaging for rp74xx and rp54xx servers is the same, rp74xx is shown.
), remove the tear
Chapter 2