HP L1000 - 9000 - 0 MB RAM User Manual page 23

Step 4. Carefully raise the lift's platform so that it will slide into the slot located under the center of the
server, but over the top of the pallet.
NOTE
Step 5. Raise the lifting device platform enough for the server to clear the pallet and packing materials, as
show below.
Chapter 2
The server's center of gravity will vary with the hardware configuration, but it is
generally located slightly behind the middle of the server.
Server Unpacking and Installation
Receive and Unpack A Non-Integrated Server
Lifting Device
Platform.
9