HP L1000 - 9000 - 0 MB RAM User Manual page 29

bracket into the vertical, rectangular slot in the aluminum spacer. The slide should be positioned in
the cabinet so that it is horizontal and level.
Step 8. Securely fasten the rear of the slide's mounting bracket to the rear vertical mounting post by
installing and tightening two of the M5 x 16 screws with cress-cup washers thorough the mounting
post, through the slides mounting bracket and into the threaded nuts attached to the mounting
bracket.
Chapter 2
Guide Pin
Server Unpacking and Installation
Install Stand-Alone Server in a Cabinet
Hook
15