HP L1000 - 9000 - 0 MB RAM User Manual page 54

Installing Additional Components
Installing Graphics
Step 5. Grasp the handle on the right rear panel and remove the panel from the side of the chassis. The 12
PCI slots, numbered 1-12 from bottom to top, will be in view.
Step 6. Remove the PCI slot cover from the slot that will receive the PCI card. To remove the PCI slot cover,
slide the PCI slot cover away from the server.
Step 7. Center the graphics card within the space created by removing the PCI I/O slot cover. Slide the card
toward the edge connectors. Ensure the edge connectors on the card are in alignment with the
connectors of the slot. Apply pressure to the card until it snaps firmly in place. Repeat process for
USB card.
NOTE
40
The graphics card must be installed in any Turbo slot while the USB will work in any
slot. To reserve Turbo slots for high performance I/O cards, install the USB card in a
non-Turbo slot
Chapter 3