Belt Clip & Optional Headset - AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual

5.8 ghz 2-line corded/cordless telephone/answering system with caller id/call waiting

Hide thumbs Also See for TL76108 - AT&T 5.8GHz Digital Corded/Cordless Answering System:

Table of Contents

Getting started

Belt clip & optional headset

For handsfree telephone conversations, you can use any industry standard

2.5 mm headset (purchased separately). For best result, use an AT&T 2.5 mm

headset. To purchase a headset, visit our website at

www.telephones.att.com

1 (866) 288-4268.

Installation

Snap the belt clip

into the retaining

tabs on both sides

of the handset as

shown in the

figure.

visit our website at

or call

Press to switch

to headset.

1 (800) 222-3111.

Plug a 2.5 mm headset

into the jack on the side

of the handset (beneath

the small rubber flap).

Removal

Gently lift either of the belt

clip retaining tabs, shown

in the figure, outwards to

remove the belt clip from the

handset.

In Canada, dial

Lift the rubber

flap here.

Left side of handset

Table of Contents