Dial Type - AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual

Telephone operation
BASE
RDL MENU CID
MENU softkey
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
OK
RINGERS
CALL SCREENING
SET PULSE/TONE
KEYPAD TONE
SET
LI MODE: TONE
L2 MODE: TONE
SET
LINE I MODE IS
PULSE
TONE
OK
Telephone base settings

Dial type

Both line 1 and line 2 are programmed for tone
dialing. If you do not have touch-tone dialing
service, you may want to change it to pulse
dialing.
To set the line(s) in pulse or tone mode:
1. Press the MENU softkey when the phone is not
in use to enter the feature menu.
2. Press the or
BASE menu, then press the OK softkey.
3. Press the or
PULSE/TONE menu, then press the SET
softkey.
4. To set for line 1, press the
choose L1 MODE: TONE.
-OR-
To set for line 2, press the
choose L2 MODE: TONE.
Press the SET softkey.
5. To change the mode to pulse, press the
softkey to choose PULSE.
-OR-
To change the mode to tone, press the
softkey to choose TONE.
6. Press the OK softkey to save your preference.
36
softkey to scroll to the
softkey to scroll to the SET
or
or
SETUP
softkey to
softkey to
or
or