I N S T A L L A T I O N Standard AC Outlet AC Adapter Power Cord Insert the microcassette. Lift the cover and insert the microcassette with the full reel to the right. Choose a spot near an electrical outlet and a telephone jack.
Page 3
I N S T A L L A T I O N Fast forward during message playback. Save messages. should be on steadily. If the light is flashing rapidly, the microcassette is not installed properly. Remove the cassette, and check to see if it's damaged.
Charging the Handset Battery Pack The batteries need charging when: • The phone beeps four times when you press • The LOW BATTERY light on the handset flashes on and off. • The phone does not respond when you press , and no lights go on.
I N C A S E O F D I F F I C U L T Y If you have difficulty operating this phone, try the suggestions below. If you still have trouble, call 1 800 722–9125. If the phone does not work at all, check these items first •...
Page 6
I N C A S E O F D I F F I C U L T Y If you have difficulty hearing messages • If messages are garbled, the recording heads may be soiled and should be cleaned. • Unplug the system from the electrical outlet.
O P E R A T I O N Making A Call Press , and wait for the PHONE light to go on steadily. When you hear a dial tone, dial the number. NOTE: You might experience a slight delay before you hear a dial tone, as the AutoSelect feature searches for a clear channel.
Light goes on when battery needs recharging. Mute handset microphone. Redial last number called. Access telephone subscriber services. Dial number stored in M1 memory location. Adjust handset volume. M E M O R Y This cordless phone can store 10 telephone numbers that you can dial just by pressing and one of the number buttons.
O P E R A T I N G This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office.
A N S W E R I N G S Y S T E M O P E R A T I O N Light goes on when handset is in use or battery is charging. Record a memo, or rewind tape during message playback.
A N S W E R I N G S Y S T E M O P E R A T I O N Ring Select Use the Ring Select switch on the back side of the base unit to select how many times the line will ring before the system answers a call.
A N S W E R I N G S Y S T E M O P E R A T I O N FROM A REMOTE TOUCH TONE PHONE Remote Access Code The Remote Access Code is a 3-digit code which lets you access your answering system away from your home or office.
Page 13
Answering System 7610 Operation From a Remote Touch Tone Phone To access your answering system: 1 Dial your telephone number. 2 When the system answers, enter your 3-digit Remote Access Code. The system announces the number of messages received, then beeps twice and is ready to accept a command.
Page 14
COMMAND Play all messages Play only new messages Replay messages after playing messages Rewind Hold down Fast Forward Hold down Clear messages Stop ; press Record announcement press Change Remote Access Code Turn system on Turn system off COMMAND Play all messages Play only new messages Replay messages after playing messages...