Ringer Volume; Temporary Ringer Silencing - AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual

Telephone operation
HANDSET I
RDL MENU CID
MENU softkey
DIRECTORY
MAILBOXES
SETUP HANDSET
REGISTER
OK
RINGERS
LOW BATT TONE
KEYPAD TONE
CONTRAST
SET
L1/INTERCOM VOL
L2 VOLUME
L1 MELODY
L2 MELODY
SET
L1 VOLUME
- OK +
NOTES:
1. If more than one handset
is installed, each handset
will ring when there is
an incoming call unless
the volume is turned off.
Pressing OFF/
CLEAR
handset will only silence
the ringer of that particular
handset.
2. The ringer volume level also
determines the ringer levels
of intercom calls (pages
22-23). If the handset
ringer volume level is set
to off, that handset ringer
is silenced for all incoming
and intercom calls.
Handset settings

Ringer volume

Using this menu, you can set the handset ringer
volume level or turn the ringer off.
To adjust the RINGER VOLUME:
1. Press the MENU softkey when the phone is not
in use to enter the feature menu.
2. Press the
HANDSET
3. Press the SET softkey to select RINGERS menu.
4. To set the volume for line 1 or intercom, the
SET softkey to choose L1/INTERCOM VOL.
-OR-
To set the volume for line 2, press the
softkey to choose L2 VOLUME.
Press the SET softkey.
5. Press the + or - softkey to increase or decrease
the ringer volume.
-OR-
Press the
volume. After it reaches the maximum setting,
the next press will take the volume level back
to the minimum setting.
6. Press the OK softkey to save your preference.

Temporary ringer silencing

Press OFF/CLEAR on a handset or CLEAR on the
telephone base while the telephone is ringing to
silence the ringer temporarily. This will silence
on one
the ringer without disconnecting the call. The
next incoming call will ring normally at the preset
volume.
or softkey to scroll to the
menu, then press the OK softkey.
/VOLUME key to increase the
28
SETUP
or