Call Transfer Using Intercom - AT&T TL76108 - 5.8GHz Digital Corded/Cordless Answering System User Manual

Telephone operation
NOTES:
1. If the called handset or
telephone base is not
answered within 30 seconds,
the outside call will return to
the calling handset and be
put on hold. If the call is not
resumed in five minutes, the
calling handset will ring and
the screen will display CALL
ON HOLD RING BACK! When
it rings back if the call is not
answered in 30 seconds, the
call will be ended.
2. Pressing OFF/
CLEAR
the handset or CLEAR on
the telephone base will
temporarily silence the
intercom ringer.

Call transfer using intercom

On a cordless handset:
Use the intercom feature to transfer an outside
call to the telephone base or a cordless handset
in the system.
1. While on an outside call, press
X-FER
/
2. Press the
handset and press the OK softkey, or enter
the handset number (e.g. 1 for handset 1). The
called handset will ring, and its screen will
show TRANSFER FROM HANDSET X.
-OR-
Press the
press the OK softkey, or enter
the outside call to the telephone base. The
telephone base will ring, and its screen will
show TRANSFER FROM HANDSET X.
3. On the ringing handset, press LINE 1
LINE 2
SPEAKER to answer the transferred call.
-OR-
On the ringing telephone base, press
/INTERCOM INTERCOM
the corded handset to answer the transferred
on
call.
If you want to intercom the desired handset
or telephone base before the outside call is
transferred, press the HOLD softkey to put the
outside call on hold and follow the steps for
Intercom on page 22. At the end of the intercom
call, resume the outside call by pressing the
corresponding line button and follow the steps
on this page to transfer the call.
on the handset.
/INTERCOM
or softkey to choose the desired
or softkey to choose BASE and
/
FLASH, /X-FER/
/TRANSFER
25
enter 0 to transfer
/
INTERCOM or
or SPEAKER, or lift
or
FLASH