Table of Contents
Advertisement
Getting started
Belt clip & optional headset
Install belt clip as shown (optional).
Snap.belt.clip.
into.notches.on.
both.sides.of.
handset..
For hands-free telephone conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
To.release.belt.clip.from.
handset,..lift.one.side.of.
the.belt.clip.out.of.the.
notch.
Plug.2.5.mm.headset.into.
the.jack.on.the.side.of.
handset.(beneath.small.
rubber.cap).
10
NOTE: If.the.sound.
quality.of.the.headset.is.not.
good,.try.unplugging.it,.and.
firmly.plugging.it.in.again.
Advertisement
Table of Contents
