Belt Clip And Optional Headset - AT&T SynJ SB67108 User Manual

Getting started

Belt clip and optional headset

Install the belt clip, if desired.
To use an AT&T 2.5 mm headset, plug it into the jack on the side of the
handset, as shown below.
Snap the belt clip
into notches on
both sides of the
handset.
Plug the 2.5 mm
headset into the jack
on the side of the
handset (beneath the
small rubber flap).
11
To release the belt
clip, pull and unlock
one flap from its
notch first before
detaching the whole
belt clip from the
handset.