Belt Clip & Optional Headset - AT&T E5921 User Manual

Getting started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip
into notches
on both sides
of handset.
For handsfree telephone conversations, use any industry standard 2.5 mm
headset (purchased separately). For best results, use an AT&T 2.5 mm headset.
To purchase a headset, visit our website at www.telephones.att.com or call 1
(800) 222-3111. In Canada dial 1 (866) 288-4268.
visit our website at www.telephones.att.com or call 1
Plug 2.5 mm headset
into the jack on the side
of the handset (beneath
small rubber flap).
10
To release belt clip from hand-
set, press on both flaps of the clip
(as shown). Pull and unlock one
flap from the notch first before
detaching the whole belt clip from
handset.