Attaching The Cable Tray - HP DL360 - ProLiant - G3 Setup And Installation Manual

Attaching the Cable Tray

To attach the cable tray:
1. Move to the rear of the rack.
2. Place the cable tray in position on the server (1) and secure the cable tray to the
server and rack rail by tightening the server and the fixed rail locking bracket
thumbscrews (2).
NOTE: There are two thumbscrews located on the cable tray rail bracket. The fixed rail
locking bracket thumbscrew, located farthest away from the server, and the sliding rail
cable tray thumbscrew, located closest to the server. The cable tray assembly comes
standard with the fixed rail locking bracket thumbscrew, which is used only for universal
fixed rack rail installations.
Figure 3-5: Attaching the cable tray using the fixed rail
locking bracket
HP ProLiant DL360 Generation 3 Server Setup and Installation Guide
Server Installation
3-7