Attaching The Cable Management Arm; Attaching The Cable Management Arm To A Square-Hole Rack - HP ProLiant DL580 Setup And Installation Manual

2. Secure the retaining clip onto the power cord.
Figure 8-13: Securing the retaining clip

Attaching the Cable Management Arm

The cable management arm ships with a round-hole bracket and a square-hole
bracket. Use the appropriate bracket instructions for the server rack.

Attaching the Cable Management Arm to a Square-Hole Rack

IMPORTANT: If attaching the cable management arm to a round-hole rack, refer to "Attaching
the Cable Management Arm to a Round-Hole Rack."
1. Slide the bracket onto the rack (1).
2. Insert the bracket hooks into the square holes on the rack, and then push down to
secure (2).
3. Tighten the thumbscrew to stabilize the cable management arm on the rack (3).
HP ProLiant DL580 Generation 2 Server Setup and Installation Guide
Installing the Server in a Rack
8-17