Chapter 8
Installing the HP NetServer in the HP Rack System/E or Rack System/U
7. Slide the anti-tip foot into the rack.
8. Return to the HP Rack Installation Road Map to complete the rack
installation.
Attaching the Cable Management Arm
The Cable Management Arm for the HP NetServer LH 3000r can only be
mounted on HP Systems racks. The HP NetServer Cable Management Arm allows
the cables, including the power cord, to move in and out with the HP NetServer
chassis on its slides without being accidentally disconnected. See Figure 8-16.
WARNING
Before sliding out the HP NetServer, ensure the anti-tip foot is
still extended from the front of the rack. A tip-over hazard
exists, so never slide more than one component out of the rack
at a time.
Figure 8-15. Installing the Bezel
101